EN 
RU 
ES 
AR 
ZH SS nonwoven machines are extremely important pieces of equipment and require regular maintenance in order to keep them running efficiently and effectively. Not only are they expensive to replace if they malfunction but they can also cause significant delays in production processes and increased costs if they are not properly maintained.
- Check tensions regularly
- Clean dust and dirt from the machine
- Inspect the drive belt & replace if needed
- Check the drive cylinder & replace if needed
- Lubricate the SS nonwoven machine regularly
Check tensions regularly
One of the most important maintenance tips for SS nonwoven machines is to check tensions regularly. It is important to ensure that the correct tensions are maintained throughout the machine to prevent damage to components and ensure that the fabric remains in its best condition. Inspect the settings carefully each cycle and make adjustments as necessary. It is also important to check for any loose or worn parts and replace them as soon as possible to ensure the machine operates at its best.
Clean dust and dirt from the machine
Keeping your SS nonwoven machine clean helps it run efficiently and extends its life. Dust and dirt can build up over time and impede the machine’s performance. To make sure your machine is running at its best, it is important to clean off accumulated dust and dirt. To do this, start by using a vacuum cleaner to remove any loose dirt particles. Then, use a damp cloth to wipe down the machine, paying particular attention to the areas around the moving parts. Finally, use a dry cloth to dry the machine and remove any remaining dirt. Following these simple steps will ensure that your SS nonwoven machine is clean and running smoothly.
Inspect the drive belt & replace if needed
The drive belt is a crucial component of any SS nonwoven machine. Periodically inspect the drive belt for signs of wear and tear or fraying. If the belt appears to be cracked or broken, it is important to replace it as soon as possible. Replacing the drive belt regularly can help ensure the machine is in proper working order and can help prevent any unexpected issues or accidents from occurring.
Check the drive cylinder & replace if needed
The fourth maintenance tip for SS nonwoven machines is to check the drive cylinder and replace it, if needed. This cylinder is responsible for powering the machine and ensuring it is running at its optimal speed. If the cylinder is damaged or worn, it can cause the machine to run inefficiently and may lead to more frequent breakdowns. Checking the drive cylinder regularly and replacing it when it is necessary will help to ensure the machine is running smoothly and efficiently.
Lubricate the SS nonwoven machine regularly
It is important to keep your SS nonwoven machine lubricated in order to keep it running in optimal condition. Ideally, you should lubricate the machine regularly according to the manufacturer’s recommendations. If you are unsure of the specifics, refer to the owner’s manual. Lubrication should be applied to all moving parts of the machine and should be done with the appropriate lubricant. Be sure to wipe the lubricant off the outside of the machine to prevent it from dripping onto the floor. Proper lubrication will extend the life of the machine and help ensure it runs smoothly.
Regular maintenance of SS nonwoven machines is essential for ensuring that they continue to operate effectively and efficiently. Through regular inspections, cleaning, and lubrication, operators can ensure that the machines are working properly and that their output is of the highest quality. If you are not understanding, please contact DongYang AoLong Non-woven Equipment Co., Ltd.