English 
Views: 55 Author: Site Editor Publish Time: 2022-06-08 Origin: Site
The non-woven winding machine is the rewinding part of the coil processing production line. The raw materials are mechanically wound into coils, and the designs are diversified according to the actual process requirements. Commonly used are simple winding machines, hydraulic winding machines, and winding machines. Generally, the material has strict requirements on the inner diameter of the coil, the outer diameter of the coil, the thickness and width of the coil material.
What is the principle of the automatic non-woven winding machine?
What are the characteristics of the automatic non-woven winding machine?
What is the material of the non-woven winding machine?
The principle of the fully automatic non-woven winding machine: the non-woven winding machine performs the movement of winding and rotation under the action of the tension of the silicon steel sheet. The strength, rigidity and stability of the main shaft of the winder, the structural parts in the winder and the anchor bolts of the base should be considered. In addition, with the winding of the coil on the reel, the diameter will increase, and the moment generated by the tension of the silicon steel sheet will also increase.
The torque motor has the characteristics of constant power transmission, that is, the torque speed is constant. Design with constant speed. By making the spinning speed of the circular loom consistent with the winding speed of the non-woven winding machine, it is possible to save the trouble of manual participation in the process of weaving and rewinding, and realize the concept of modern production in the textile industry.
1. The automatic non-woven winding machine must maintain a constant tension during the entire rewinding process without manual adjustment.
2. When the empty roll is started, the tension should not be too large to prevent the film/meltblown cloth/non-woven fabric from wrinkling, and the tension should not be too small when the full coil is running to prevent the film/meltblown cloth/non-woven fabric from being rolled too loosely.
3. The system of the fully automatic non-woven winding machine has a sensitive response. During the acceleration and deceleration process, it can be quickly adjusted according to the changes of the speed and tension of the previous stage to ensure constant tension.
4. The tension is required to be quantified, that is, the tension can be set according to the process requirements of different/meltblown fabrics/non-woven fabrics/film production.
5. The automatic non-woven winding machine adopts a fully automatic rewinding, reel changing and slitting integrated machine to package the meltblown cloth into rolls. Save human and financial resources for customers.
The shelf of the non-woven winding machine needs a certain load-bearing capacity because it needs to bear the load-bearing and winding of the melt-blown cloth material, so the aluminum profile with a smaller specification is not suitable. Generally, 4040 with higher load-bearing requirements is used. Aluminum profile and 5050 aluminum profile, 50100 aluminum profile series.
DongYang AoLong Non-woven Equipment Co., Ltd. is professional manufacturer of pp spunbond non-woven fabric production lines, PET needle punching production lines, and special application treatment equipment.
