What do you know about non woven roll making machine?

The non woven roll making machine is suitable for non-woven roll making and tying. The looping machine has high production efficiency and good wire quality, which solves the problems of low production efficiency and poor wire quality in looping and tying.

What is the function of the non woven roll making machine host?

What is the operation process of non woven roll making machine?

What is the maintenance and upkeep of the non woven roll making machine?

What is the function of the non woven roll making machine host?

1) The non-woven roll making machine adopts a tension-sliding cable arrangement, and the winding speed of the cable layer is fast.

2) The expansion force of the cable depends on the self-expansion force of the wire, which can ensure that the cable pitch is not affected by the size of the wire diameter, so that the wires are arranged in parallel to form a layer-wound winding.

3) The non-woven roll making machine adopts frequency conversion control soft start and automatic braking technology, and sets an acceleration time in the frequency converter to avoid accelerating too fast and thinning the wire when starting. There are speed-up time, normal wire winding time, and speed-down time when starting up. When the meter count reaches the set number of meters per plate, the inverter has an automatic braking function, and the host starts the linkage braking function to stop the motor.

What is the operation process of non woven roll making machine?

1. Before installing the pay-off reel of the non-woven roll making machine, release the brake tension.

2. According to the diameter of different spools, adjust the tension of the pay-off. The higher the position of the adjustment knob, the greater the tension of the pay-off.

3. Do not press the meter wheel too tightly to avoid crushing the wire.

4. Adjust the preset length of the electronic meter according to the requirements of the wire and cable manufacturers for the length of the coiled wires. Adjust the preset length of the electronic meter. After several debugging, the purpose required by the user is achieved.

5. For the automatic brake device on the automatic tensioning and pay-off machine, the automatic brake knob should be adjusted according to the diameter and weight of the spool.

What is the maintenance and upkeep of the non woven roll making machine?

1. The cable guide wheel rod of the non-woven roll making machine needs to be filled with lubricating oil to make it have a certain lubricating oil film.

2. The bearing of the non-woven roll making machine should be filled with lubricating oil once every 500 hours of operation.

3. For the automatic tensioning and pay-off machine of the non-woven roll making machine, the lifting screw parts and the worm gear and worm parts are filled with lubricating oil according to the usage.

4. The cantilever storage wheel and fixed wheel on the automatic tensioning and pay-off machine of the non-woven roll making machine should be filled with lubricating oil once a month.

DongYang AoLong Non-woven Equipment Co., Ltd. has committed to providing the most suitable non woven roll making machine at a reasonable price, and whatever it takes to satisfy the customer’s needs.