AL--2000mm Weste Felt Needle punching Carpet Nonwoven Fabric Making Machiner

AL--2000mm Weste Felt  Needle punching  Carpet 

                          Nonwoven Fabric Making  Machiner

1:Final Products Name：waste felt needle punching fabric making machine ;

2:Raw Material：Polyester staple fiber, polyester hollow staple fiber (optional),Low melting point fiber and natural wool fiber etc, specification:4D-25D;

3:Production process: A percentage of polyester staple fiber ,hollow staple polyester( waste fiber or waste cloth fiber) and low melting point fibers be opened and blended by opener, then carded and lapped with required thickness, and set by the process of needle , oven and setting;

4:Products feature: good permeability, good warmth retention property, lightweight sound absorbing, high resilience, anti-aging, washable, clean with no harmful substances;

5:Products Application: The product is widely applied to industry，high way uses;

6:Raw Material Ratio: Usually low melting point fiber 4Dx51mm 15%-25%, hollow polyester staple 6DX51-65mm 40-50%(optional), Polyester fiber 6DX51-65mm 30-40%;

2:Production Line technical parameters

A:Machine Width: 2000mm

B:Product Name: waste fabric, geotextile, needle punching fabric ect.;

C:Max Width of Product: 1600mm

D:Thickness:10~120mm

E:Product GSM:100~4000g/m²

F:Product Capacity:100~300kg/h (according to product specification)

G:Needle Punching: Middle speed needle punching

H:Proper raw material: polyester，polypropylene，low melting point fiber，Specification:4D~25DX 31~76mm

I:Production Line Processing :

Bale Opener→Main opening→Big Cabinet Blender →Vibrating Feeder→Single Cylinder Carding Machine→Cross Lapper→pre-needle punching →down-loom middle-speed needle punching →up-loom middle-speed needle punching→Automatic Slitter and Winder